Started to cleco the R/H wing lower skins in place but realized it maybe easier to rivet the flaperon brackets on before the lower skins get installed. I'll need to keep some rivets out so I can get the trailing edge pieces installed, especially around the aft strut bracket. Removed the clecos. I reached out to Zenith a couple of weeks ago about my wing kit didn't get the fuel sender access panels. I've seen some Super Duty gets with that hole cut and others not, mine was cut. I'm actually putting the fuel senders on top of the tank but I can still use that access panel for inspections purposes. Zenith sent me the nutplates and screws but sent me the fuel access panels instead. Decided I'll just make them instead of bothering them again. Made a template and traced it onto a piece of 6061-T6 .040 aluminum.