With the R/H wing outboard trailing edge skin cleco and taped into position I figured I should make sure the wing tip fits. Started cutting the R/H wing tip with a cutoff wheel on the dremel. I had one side almost cut all the way when all of a sudden a small chunk broke off. It's on the aft section of it and will be inside of the wing but I will need to do a fiberglass repair on it. I need to add some aluminum strips on it anyways to add support for the rivets. I cut rest of it with a hacksaw blade. I recommend cutting this piece this way. It was cleaner and came out better. Sanded the edges smooth and added some cutouts where it was hitting some of the structure inside of the wing. This fiberglass tip fits very well. I still need to drill it up though.