Project: EaglesWing     -     Entry

Apr 06, 2023 1.6 Primed access panel Category: Rudder
Turned on the garage heater and got the temp to 70 degrees. Scuffed the access panel cover and ring along with the rudder close out skin. Cleaned the three pieces with SPI Waterborne Wax and Grease Remover. Then wiped with wax and silicone free tack cloths (TCP Global). Primed pieces with SPI Epoxy Primer,






NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.