Finished the installation of the AC Specialties Flightlines bracket. Modified one of my cheap 7/16” open end wrenches to reach the mounting bolt per the instructions. It's a tight little space to torque a 1/4” bolt. Couldn't get a torque wrench in there so had to rely on my calibrated wrist to set the torque. Gritted my teeth and drilled a hole in my brand new red bracket to secure a safety wire after loosening the 90 degree fuel feed. Struggled safety wiring the bolt since it's such a small space and trying to figure out the correct technique. Eventually got everything back together and torqued the last two AN3 bolts that hold the fuel transducer to the bracket. Hopefully there won't be any fuel leaks during the fuel test as it will be a PITA to troubleshoot.