Began upgrading the firewall pass throughs that were the aluminum screw type to the steel ones I just got. Photo shows the new pass through next to the old one. Tried to connect the prop cable to the prop governor and forgot to remove the inside aluminum ring from the cable. Removed the cable and tried to connect the cable again with no result. The rod end bearing bolt cannot be removed without disassembling the prop gov from the bracket. Spent WAY too much time trying to figure this out and researching on VAF. Decided at supper to try and twist the cable into the rod end bearing with some help from the wife and I think that is going to work. Stand by for further results.