Marked and drilled the top of the left stick for the anchors holes for the infinity grips. New step drill bit and oil worked well to drill through the steel tubing. Installed grip and routed wires thru the grommet at the bottom of the stick. Reinstalled the left stick and grip in the fuselage and found that my static and antenna lines need to be moved to allow room for the aileron pushrod. One step forward, two steps back. Haha. Installed the right grip on the stick and routed the wires out the hole in the stick and installed the grommet to protect the wires. Reinstalled the right stick and grip in the fuselage. May have cocked the grip a little too far to the left, but that is what felt right.