Bolted and set neutral for left wing aileron. Prepped air gap parts and pitot mount . Instrument Air hose colors: • Pitot - Red • Static - White • AOA - Blue I worked section 20, but didn't get much done. I did start mounting the gap fairing and discovered I'm going to need someone with a thin arm to get in and hold a bucking bar for the gap fairing rivets - very hard to reach. The left wing has a 16 pin connector: 2 will be 14GA for the pitot heat, 10 for the wing tip, fuel and pitot heat control for a total of 14. The right wing has a 28 pin CPC connector, with 9 for the wingtip, 5 for trim servo, 4 for the roll servo, and fuel capacity for a total of 19.