I'm planning the standard Airflow Performance Fuel Pump and Filter with TS Flightlines fluid lines. I'm not installing the "Red Cube" Fuel Flow Transducer in the tunnel. I plan on locating it on the Air Box. I assembled the fuel pump and filter by removing the gold AN nipple and O-ring. Put the O-ring on the filter side and attach the filter to the pump. It rests nicely in the pump/filter cradles. There are two fuel lines in the kit that are marked "Andair Valve to Firewall - no Transducer". So, the longer line goes from the firewall fitting over the heater duct and down to the output side of the pump. The shorter line with the 90 degree elbow goes from he input side of the filter up to the fuel valve. Still waiting for the replacement fuel valve... I ordered an extension for the fuel selector valve as well to accommodate the location and the SFSA center console. I'll need to fabricate a new fuel selector bracket for the Andair FS20 Type 7 Valve.