Getting ready for the avionics installation. I decided to dissect some Canbus Wire. There is even a YouTube video for the stripping instructions on the GigaFlight website. The construction of the wire is very interesting. There is an outer jacket and braided shield, like most shielded wires. Inside of that is a PTFE Tape Binder holding the two wires. There are two fillers of foamed FEP that provides the separation between the wires Also, there is a dual-wall insulation of the wires to maintain a 120 ohms-controlled impedance. The outer wall of the wires is 20AWG while the inner wall is 24AWG.