Kansas finally recovered from Snowmaggedon 2021. Crazy, a week ago it was sub-zero, today it was 59* Took advantage of the temp and primed the main longerons, as well as the armrests and some other odds & ends. A short section of the longerons will be visible after final assy in the baggage compartment area. I debated on whether to try to prime that section gray so that if I scratch the top coat the neon yellow zinc phosphate primer wouldn't show through, but ultimately decided that I was probably overthinking it. That area is pretty protected, so its pretty unlikely to get much wear and tear, so I'll likely just top coat later and call it good. At this point, everything is dimpled, deburred, countersunk, & primed as appropriate. I'm so ready to start putting this back together!