Started working on the baffles this week. I'm going with RV14 baffles which are pretty much plug n play for the 14, but at least in my case will need to be cut down to fit under my RV7 cowling. I did the paperclip trick and determined that the perimeter all needs to be trimmed down about 3/8". Also need to patch the honking big 5" hole in the r/h aft baffle thats used to duct cooling air to the r/h firewall mounted oil cooler on the RV14. Once everything was more or less trimmed to size, I painted all the individual pieces white with dupli-color engine block paint. The next day I applied teh strips of RTV that are called out in the instructions. were out of town for a week over the 4th so that will be it for a while