7/31/2020
Completed the SB#18. This is a 2 part process: first, inspect the crimp width of less than 8.9 mm and then to put corrosion resistant grease on the fittings. It was not required to re-wrap the ends but I did anyway.
7/28/2020
Received a SB for inspection of the Rudder cables crimps. So a read over and inspection will push aside the next few days plans. I will need to order some materials to comply.
At least I get some of the SB's during the build so it is relatively easy to take care of them. The numbering system is a little odd even though it is SB#18 it does not mean there are 18 SBs for this particular model.