10/16/20 I have to add on to the pigtails of the Nav lights so they can reach the connectors at the wings. I used self soldering shrink connectors and then shrink wrapped the entire wire. The right wing tip is shown and I will have to do both tips 10/8-9/2020 There are a number of tasks with each wing I need to accomplish. The wet wing fuel tanks are off for pressure leak checks . With the wing on the bench(s) I will install the taxi & landing lights in each wing. A taxi and landing light (2 per wing) are in located on the outboard and will also have the wig-wag configuration as well. There is a lens mounting mod that I will be doing to have a cleaner look that involves installing nutplates and countersunk screws. Also, I will swap the adjustment springs and adding spacers. I also added wire sleeves for protection.