Made a big step today geting some of the wiring installed that will allow the aircraft to run electrical power from its systems, rather than the power supply I've been using. Got a diode soldered onto the starter contactor wire, then ran P-Leads for both sides, ground for the PMags, wires from the ignition switch to VPX, and from the switch to the PMags. When able, I will hook up the battery and I should be able to hit the Master Switch on the poanel, get power to all systems, then if I turn the key, should hear the starter contactor switch. Of course, I'll have the starte disconnected until ready for first engine start. Tracey added more zip tie bases to the flooring and tidied everything up. She does great work!