Installed left and right side static ports in the tail with standard 1/4 inch tubing and a T push to connect join. Used a heat gun to soften up the end to make it easier to push onto the barbs. Will be putting a small amount of RTV on connection when received (backordered currently with aircraft spruce). Utilized the Van's static port kit and the 75mm down / 110mm forward placement where the rear lower skins meet (based on other TSi owners placement experience). Later the plan is to have an alt static port source behind the panel also with a panel switch. Ran tail harness for gmu 11, tail beacon and trim along the lower left longeron. Ran the VOR antenna coax and static tube along the lower right longeron. VOR coax, trim and beacon have quick disconnect adapters.