I'm very late in the build so the number of parts, including hardware, is dwindling. In this session I found that the amount of hardware is dwindling too much. I got started on building the GTR 200 AND GTX 35R RACKS (Section 42Nis page 12) but immediately ran into problems find the correct hardware. Where it goes, I don't know. But I didn't have enough AN507-632R8 crews or MS21042-06 nuts to complete the rack. So I jumped ahead to 43CiS_12iS, the dual G3X instructions and prepped up the flange doubler only to discover I have a shortage of MS21051-L06 nutplates. So I ordered one along with some additional hardware, bringing progress to a halt for now. The order: AN507C632R8 - Flat Head Screw (non structural) 6 $0.48 NAS1149FN632P Flat Washer 15 $0.60 MS21042-06 Metal Lock Nut 8 $2.80 AN525-10R8 Washer Head Screw 4 $0.80 NAS1149F0332P Flat Washer 20 $0.60 AN507C632R6 - Flat Head Screw (non structural) 8 $0.64 AN525-10R7 - Washer Head Screw 12 $2.40 MS21042-3 Metal Lock Nut In writing this update, I have also realized that the dual G3X also requires two MS21051-L06 to be installed in the upper flange. Do I REALLY want to put yet another order in for just two stinking nutplates? I do not. Anybody got a couple?