Bit of a delay in wing rib capstrip order, so between my last entry and this one, I've just continued to varnish...lots of dry time (minimum 24 hours between coats). Finally got the shipping date for my capstrip, so i wanted to build a wing rib jig on a stable board that will allow me to work indoors during the winter (the 'garage' that I work in is open on one side and is really just a giant flying buttress to keep the hillside up, so it floods with all of the rain here in Washington and the temp gets cold enough that epoxy doesn't work). so, got some 1/2" ply hobby boards and built a super rigid surface to lay out the jig on.