Title: GPS antennas and coax connectors; ELT antenna
1. Temporarily attached the GPS and XM antennas to their shelf. 2. Cut the three coax lines to the appropriate length. Attached TNC connectors to two of them, and prepped the third one for its BNC connector. (The BNC connectors I have in stock are not made for RG-400 cable, so the center conductor doesn't fit. I ordered a proper BNC connector from SteinAir.) 3. Repositioned the ELT antenna slightly to improve the clearance from the empennage fairing. [No photo.]


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.