1. Painted the cabin heat knob mounting plate. [No photo yet] 2. Secured the throttle cable to the engine mount with two Adel clamps. 3. Started to install the rear cockpit throttle, but I noticed that the engraved placard (which had been wrapped in plastic film for a long time) has become streaked with some kind of discoloration from the plastic. You can't really see it unless the light is just right, but then it looks pretty bad. So I'll have to get another one made at a local trophy store. 4. Installed the clevis rod ends on the throttle, prop and mixture cables -- along with the big attachment nuts that hold the cables to the throttle quadrant.. 5. Attached the zip-tie mounting brackets that will hold the wires for the backup PTT switch and the throttle grip. [No photo]