1. Roughly sanded yesterday's flox fillet at the bottom of the windshield, just to give it a general shape that will be a good base for the fiberglass layups. 2. Once I had the canopy latch installed, and was able to close and lock the canopy, I made note of how the side fairing "ramps" will meet up with the canopy skirt. It became apparent that the left side needed to be built up slightly more to match the right side. I mixed up some more resin/flox/micro/cabosil/dye mix and applied it on the left side. Once this cures, I will sand it and get it ready for the fiberglass.