1. I had some Rhino Liner left over from coating my cowlings, so I decided to apply a coat of it to the insides of my wheelpants. This stuff sets up quickly, so I had to mix up two batches to get the job done. 2. Installed the R wheelpant for the first time with all its final hardware, just to check its fit. Like the L one, there is a slight spread of the seam at the top of each fairing where it meets the gear leg. After looking at both sides, I decided to leave them "as is" for now. I'll ask my painter and some other friends about them, and see what they think. 3. Installed all the remaining wheelpant attachment nutplates on both landing gear. I think the "outboard screws vs. rivets" idea was just perfect, and will make servicing the brakes and tires a lot easier.