1. Sanded the gel coat off both gear leg fairings. 2. Attached both fairings to the fuselage to check their fit and assess what, if anything, I want to improve on them. 3. I noticed that the R fairing doesn't sit quite as flush to the fuselage side as the left one, but I think I'll be able to cure that with a strip of rubber U-channel grommet material around the edges after the plane is painted. Overall, I think both fairings are acceptable. The "wing curve" on each fairing is still an unknown. I will have to work fast on the day we put the wings in place for painting -- marking the fairings for trimming, then removing them and getting them to the proper shape. This will probably be at least a week or two from now.