I finished trimming the skin around the outboard gear attach blocks, re-installed a rivet on the right side next to the notch, removed the landing gear with the help of a friend, cleaned and vacuumed out all the drill chips, reattached the fuselage to the rotisserie, and removed the wooden cradle from underneath it.
I also spent some time planning the routing of the brake lines and fuel vent lines. I organized and stored the landing gear hardware, pulling out the nyloc nuts I used to fit the gear and replacing it with the final ones I'll use when I install it for the final time. The attach blocks will be primed and painted later, too.