Removed windshield again to provide access to panel better. I realized I tied up wires too tight and unable to remove G3X screen easily. Spent time cutting and retying to get G3X to be removed easily enough to disconnect connectors in back. Also took the time to trim the plastic covers for the fuse bus boxes to fit around my mess of wires. Then labeled the covers. During this time, I realized I had wired fuel pumps wrong. I had both pumps through same fuse so if one pump shorted out, it would "kill" function of other one also. Determined I need to order a double pole and double throw switch. I went ahead and added another fuse and wire to connect to new switch and relabeled existing wires to ID fuel pump #1 and #2.