Installed oil temperature sensor and loosened plugs for manifold pressure and oil pressure fittings, waiting on the fittings as I had forgotten to put them on order. Actually pulled the engine mount back off of the plane and did a little wire sorting and added the inner fire sleeve on the firewall pass through, then re-installed the engine mount on the plane & torqued. Used cherry picker engine hoist to lift the engine from shipping pallet and moved to engine mount area. Assembled the Lord mount s and secured in mount by just pressing them together until the engine was moved closer and the bolts ran through. It had gotten late on me so for the night the mounting bolts are installed but still need a washer behind three of the four nuts. Moved hoist away for pics and then replaced it to hold at least a little weight overnight.