finished the ailerons by using a few parts from the VP2 I bought in September of 2021. The primary reason I bought the VP-2 from Canada was to scavenge metal parts that were similar or exactly like the metal parts called for in the VP-1. In this example i took the 1"x2" metal spaced from the aileron hinge bolts and the aileron control yokes. I did have to cut down the yokes to size and redrill holes. But a real time saver. UPDATE NOVEMBER 25TH. THE AN 43B 12A BOLTS HAD NO THREADS SHOWING SO TODAY I REPLACED ALL 12 BOLTS WITH AN 43B 13A BOLTS.