Right Wing (Harsh Patel): Our team leader (Maggie Colwell) got quarantined, so we decided to start the prep of the 52 wing ribs. We did about 14 of them with 4 people working for 2 hours. Left Wing (Holden Glass): Continued work on both spars. Me and Jadrien match drilled the rib doubler onto the spar. We drilled and tapped the tiedown attachment point (to tie the airplane's wings when in storage so that the wings are not damaged by wind or other external forces; literally a rope tied around the air craft). Fuselage 1 (Josh Weiss): We worked on the ford lord. We got some of the firewall attached. We are putting on nutplates and we are going to start assembling the piece. We had to lubricate the mandrills for the cherry rivets. Fuselage 2 (Richard Glidden): Team leader (Rebecca Colwell) got quarantined. We finished counter sinking the the mid center bulk head (which connets the wings to the fuselage). We learned like how to roughly gauge the counter sinker against the holes. Mentor Adam taught us how to dimple. Logger (Harsh Patel): Finally had a chance to properly update the builders log. I had to catch up a lot of the previous ones. Also due to a lack of people showing up, Steve Krog did not give a ground school lesson.