Work continued on fitting windshield and skylight. Bows fit profile of windshield and skylight perfectly. Measured and cut skylight to width. Centered middle mating strip support tube and fixed in place. Fit in place and measured for trimming rear edge of windshield. Cut windshield with dremel cutoff wheel. Refit in place. Trimmed front edge of skylight to final size. Marked and match drilled for rivets on center mating strip. Clecoed mating strip in place. Fit was perfect. Next step is to final trim rear edge of skylight and fabricate hold down strip, and to mark and drill rivet holes in support bows.