Worked on finishing up some of the tailcone assembly items - clamped and drilled in the HS stabilizer piece as well as the elevator stop piece as well. Was thankful for my close-quarter angle-drill to get the #12 bit close enough to drill out the couple of end holes up against the vertical metal pieces for the HS.
After that, I removed the two top skins, then deburred and cleaned up the two rear seat-belt attach points, and then drilled those in with the #12 bit (also, finally had a use for the chunky clecos to hold those in position).
Just a few more things and then I have to start taking this monster apart. Note to self - order a primer that has a color you won't mind seeing in your tailcone.