Worked on some small stuff today. I am mounting my dipole VHF antenna in the vertical stab so I need to fabricate mounts that won't interfere with the antenna. Built the upper mount and glued it up as well as figured out how I think I want to support the antenna cable connection. The lower mount should be a walk in the park once I get the other two mounts dialed in and attached. Fabricated the door hinges, backing plates and the gas shock mount so they are ready once I reach the point of installing the doors. Before I get there, I need to install the door and window moldings. I started with the right side door molding and got that Hysol'd and clamped along with riveting the joint. Liked the idea of getting these two set solid before I went ahead and did the rest of the window moldings. Just taking this part slow and easy since I want it to be right. Besides I ran out of clamps!!