Put it off long enough. Ran out of excuses to hold short on covering. Started on the right wing (no real plumbing like pitot tube etc.) on the bottom panel. I covered the whole Laker leading edge and with the help of my wife, we pulled and stretched the Oratex to get it glued on to the frame. Then we did the same for the top panel. So now it's all covered but hasn't been tightened. Oratex wants you to wait 24 hours at least for the glue to fully cure before you go back with the heat gun and tighten up the skin. You got to know it's tempting cause you really want to see it done. The wife did come up with the major rule for this - Don't hurry. So maybe on Saturday I'll get to fire up the heat gun and tighten it all up.