Finally got to start wiring on the Garmin system. One of the things I learned about wiring D Sub connectors back in my working days (daze?) was to put a black mark on both sides of the connector to ID pin 1. No matter how the connector is oriented or if it's the male or female side, it's easier to place pins with that visual reference. I wired in the mount and power supply for the iPad display. I also got the autopilot wired in as well. Since I have a G5 in the mix as a back up attitude indicator, it has its own GPS antenna to connect. I saw an install (maybe at the Kitfox factory during the fly in) where this antenna was mounted on a bracket attached to the panel support rod. Thought that was a pretty clean way so I bent up my version of the bracket and match drilled it to the support rod so that I can rivet it on when I'm ready.