Got the glare shield fitted in between the panel and the boot cowl/windshield. Looking at the possibility of putting in a stiffener in the middle between the panel and the brace tubes. There is a bit of 'oil canning' when I have it screwed down and think that might alleviate that. Finished up the turtle deck after getting the hinge installed. The plans call for a single aluminum brace across the deck at the hing and I thought that a brace on each side of the hinge had some merit so I made another one and installed two braces. Fit the deck to the fuselage and installed all the Dzus fasteners. Last but not least I installed the "whisker' mod on the trim access panels.