Received my new, longer bolts and was able to install and wire in my taxi lights. Covered my glare shield and installed the LED lights I am using to 'flood' the panel should I need it. Have to wait a couple days for the adhesive to totally cure before I can finish fitting the glare shield. Installed the wind screen completely (i.e. all the top, back and front screws). In looking at the screws on the side-front of the wind screen, I thought it might be better to make a long piece with plate nuts to do that attachment. That way, instead of the individual pressure points running down the screen, it would be a more even pressured attachment. Built them up, painted them flat back (no reflection) and installed them. Made that a really easy install and kept my ham hands from dropping the nuts and washers inside the cockpit.