With the right wing almost done I removed the construction jigs and with the help of my wife lowered the wing into the wing cradle I build and then worked on installing the wingtip. I followed the instructions which had me ratchet strap the tip forward into position. I went as hard as I felt comfortable with but I still had 1/8 inch gap at the front of the wing tip. I can put filler and form it before paint. I then match drilled, countersunk and dimpled as appropriate. I didnt rivet it on yet as I still need to install the position light. I think I will wait to do that when the wings are mounted on the plane so I can make sure the lights are parallel to the ground as there isnt a very good reference point. On the left wing I cleaned up the wiring a little more and installed all the clamps i wanted to secure the wiring in place.