A majority of other builders have put their total temp probe in the NACA duct and then later reported inaccurate reading. In an effort for accurate readings I installed my temp probe in the right wing root. The wire supplied with the probe is long enough to reach the dash but I did cut the wire for the wing root connection.
I also started pinning out the wires for the audio panel, its slow going but I do enjoy the process. I also installed the GA-57 GPS/XM antenna and installed coax for both. I wasnt planning on it originally but I figured its now or never and it gives me options in the future.
The other quick task I finally got around to was installing some drilled head bolts and safety wiring them for the nose gear. I didnt like how the stock factory option has you just torque the bolts. If those bolts come out and the nose gear drops that would be a bad day.