Last post I showed the cracked floor rib. I sent my proposed fix the Sling technical and they approved the fix. The patch is now on and to prevent further stress or damage on the floor I final installed the rear floors and then also put plywood on top of the floors. Before I final installed the floors I had to finish securing some loose wires and I installed some edge protectors. I also finished my rear seat by riveting the backrests to the seats and tried to install the seat. But, the spacing of the backrests are off and they contact the air frame structure before hitting the backrest stop. The spacing was factory drilled so I am not sure how the spacing is off but I am a little annoyed. I'll contact technical just to make sure I didnt do anything stupid. With the rear floors on and the wire underneath it done I am starting to finalize wiring and am working back to front. Next on the list is to install the front seat audio jacks, the rear seat power plug and an audio in jack on the center console.