Completed build of FlyLeds wingtip position and strobe lights. Connected the light boards and tail light to the control board and tested using a 9V battery. Got a chance to use the new heat gun and Hakko soldering tips. It took me a lot longer than the estimated time. I enjoyed the process and it works great. The only thing that needs to improve is the connection between the pairs of wing boards. I struggled to make the ribbon cable work and it has come loose twice. I'm going to try individual wires with ferrules and see if I can get that to fit in the space allowed. I test fit the pair of boards in the left wingtip and the cut-out was sufficient.