Looked at flyboys super track canopy kit demo and installation video and placed an order. Researched blind rivets and decided to use the LP4-3 rivets since I need a grip length of around 0.060" and the LP4-3 is 0.039" to 0.137". The other ones I had in stock had a top or bottom grip range of about 0.063". Marked and drilled the transponder doubler for the four blind rivets. Match drilled the fuselage for the blind rivets. Removed the two ADAHRs mounting brackets installed for the Dynon parts since I am now mounting the Garmin GMU 11 in the Garmin recommended position. Looked at vansairforce and my project and the GMU 11 and Stein GMU 11 mounting bracket. Added a non-magnetic screwdriver to my shopping cart. Decided I didn't need the Stein bracket. I may use some standoffs to mount the GMU 11. Mounted the pitch bell crank, Garmin GSA 28 pitch servo and all the associated parts. Used torque seal on the nuts I torqued and don't expect to remove. Decided on a location for the aft power port. Cut a mounting hole.