Title: Preparing the Horiz. Tail spars & start Horiz.Tail
Riveted the FWD spar to the stiffener, clecoed the AFT spar to the stiffener as I'm using flush rivets, I'll mock it up, up drill etc, dissasemble the AFT spar, then dimple, rivet, and rivet the whole skin. (there is not enough room to dimple the AFT spar if it's already riveted therefor the need to remove the spar from the stiffener)


NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.