Dec 27, 2020     Kit Sold - (2 hours) Category: None

I have sold the kit to a gentleman from NY. I have decided to build a CH750 Cruzer instead and will create a new project for that kit once it arrives.

  Oct 27, 2019     Reassemble - (3 hours)       Category: CabinFloor

Reassemble and rivet cabin floor components

  Oct 26, 2019     Disassemble, Debur, Prime and Paint - (2 hours) Category: CabinFloor

Disassemble, debur, and prime. Debur cabin floor and paint everything except rudder pedals (previously done).

  Oct 23, 2019     Final Hole Drilling - (1 hour) Category: CabinFloor

Final size drilling members to cabin floor

  Oct 16, 2019     Rudder Pedals - (1 hour) Category: CabinFloor

Final drill and prime rudder pedals and hinges

  Oct 12, 2019     Started - (4 hours) Category: CabinFloor

Fit center support channel and shape extrusions for cabin floor. Fit and drill front lower longerons. Install rudder pedals. Install master cylinder attachment brackets (4). Installing hinges for brake pedals.

  Oct 11, 2019     Started - (1 hour) Category: CabinFloor

Fitted heel and pedal bearing supports to cabin floor

  Oct 08, 2019     Priming - (1 hour) Category: RearFuselage

Rivet cross-members and uprights. Cleanup before final priming. Primed.

  Oct 07, 2019     Reassemble - (1 hour) Category: RearFuselage

Priming cross-members and uprights. Started re-installing members. Missed primer on plate and had to do-over.

  Oct 06, 2019     Disassembly - (1 hour) Category: RearFuselage

Disassembly and deburring of forward uprights and cross-members