May 16, 2024     Gear Mounts - (2 hours)       Category: Fuselage

Measured, drilled, and clecoed L angle to inside of fuselage for right gear mount bracket.

  May 13, 2024     Aircraft Dollies - (2 hours)       Category: Workshop

Built a new larger dolly for the front, disassembled the previous dolly, and redesigned and rebuilt iit to hold up the tail.

  May 11, 2024     Flaperon controls - (1 hour)       Category: Controls

Connected flaperon control arms to torque tube.

  May 05, 2024     Aircraft dolly - (4 hours)       Category: Workshop

Designed and built rolling dolly from materials recycled from a shipping crate. Transferred fuselage to dolly and a pair of sawhorses to facilitate access for construction.

  Apr 28, 2024     Gear Mounts - (2 hours)       Category: Fuselage

Measured, drilled, expanded to final size, and clecoed landing gear mounting brackets in place.

  Apr 22, 2024     Controls - (3 hours)       Category: Fuselage

Fitted, drilled, deburred, and riveted brake pedals to rudder pedals and installed them in the cabin.

  Apr 21, 2024     Cabin Frame - (3 hours)       Category: Fuselage

Fitted, drilled pilot holes, expanded them to size 20, and clecoed the cabin frame to the fuselage.

  Apr 17, 2024     Polished Aluminum Finish - (2 hours)       Category: Paint / Decals

Purchased a Flitz kit for putting a polished aluminum finish on the airplane and applied it to the rudder.

  Apr 16, 2024     Controls - (2 hours)       Category: Fuselage

Measured, drilled, deburred, corrosion-protected, and clecoed forward torsion bar bearing.