Jan 07, 2024     Install Firewall and Engine Mount - (6 hours) Category: Firewall

  Oct 25, 2023     Install Brakes - (4.0 hours) Category: Landing Gear

Finish drilling through steel plates and mount calipers and plates. Mount tires and nuts. Need to mark and drill for cotter keys in castle nuts.

  Apr 06, 2023     Pilot floor - (1.0 hour)       Category: Interior Finish

Measure and cut floor around fuel selector.

  Apr 06, 2023     Gasulator Install - (1 hour)       Category: Fuel System

Assembled Gasulator and fuel select marked and drilled holes. Installed bolts to attach to airframe.

  Mar 30, 2023     Landing gear - mains - (4 hours)       Category: Landing Gear

The axels were the wrong size. The wheel bearings became jammed. Needed to unassemble wheels, replace one bearing, measure the bearings and the axel, have numerous discussions with wheel and axel suppliers, hand sand the axel to correct diameter, repack bearings, reassemble wheels, and fit wheels. Still need to drill for cotter pin.

  Mar 30, 2023     Trim and install floor under pilot - (1.0 hour) Category: Interior Finish

Install floor under pilot seat. Includes modifications to panel for fit

  Mar 23, 2023     Install Rear Cargo Floor - (3 hours)       Category: Interior Finish

Cut and shaped cargo floor and installed.

  Mar 20, 2023     Brake Mounting - (3.0 hours)       Category: Landing Gear

Attempted to install brakes. Found that bearing chase will not fit on axel. Disassembled.

  Mar 17, 2023     Rudder pedal area floor panel - (2 hours)       Category: Interior Finish

Fit, drill and install rudder pedal floor area.

  Mar 14, 2023     Fabricate and dry fit elevator control horn - (1 hour)       Category: Controls