Wings are stored upright and out of the way in their original shipping crates. I also went through the process of adding an extension for the table. So now my full work table is 8+8+2 for 18 feet. Basically 17.5 ft are required for the Bearhawk (203 inches).
I leveled the table using the adjustable feel I have and an electronic level. I also snapped a center line and started drawing the horizontal cross member locations. Im working under the assumption that my vr3 tubing kit is basically self jigging. I'm not constraint the tubes except for where needed
I found out my tubing kit does not have the lowered window frame tubes for the “bravo” wings. I'll either reach out to vr3 for a fix or just order tubes and cut it myself.