Project: ranss19     -     Entry

Dec 01, 2014 0 Ran a new wire from the P-lead of the magneto to pin 33 of the Dynon D37 connector Category: FinalAssembly
Ran a new wire from the P-lead of the magneto to pin 33 of the Dynon D37 connector. Also set the adjustment for the tachometer in Skyview to 2. RPMs are reading correctly now for both the magneto (on pin 33) and the Electronic Ignition (on pin 34). Still have a problem with the fuel gauges.

No Pictures found for this entry

NOTE: This information is strictly used for the EAA Builders Log project within the EAA organization.     -     Policy     -     © Copyright 2024 Brevard Web Pro, Inc.