Riveted the painted elevator brackets to the nested doubler, rear spar and forward repair doubler. Also riveted the HS skin, where I removed rivets, to the HS rear spar and nested doubler. This completes SB-00036. YAY!! Installed the HS and elevators on the fuse to check for interference with the elevators and HS upper skin where my painter said it may rub. Removed a small portion of the top aft edge of the HS skin. Will revisit this later at final assembly and modify the up stop if necessary. Used a couple new tools to help with installation and removal of the elevator to simulate the bolts and they worked great.