Cut the pitot line and ran it to the rear of the airplane through the corrugated tubing. Cut a slot in the corrugated tubing and ran the flap position sensor wire through it. Opened up a tooling hole for a snap bushing and routed the wire through it. Cut the static line and connected it to the ADHRS. Installed a snap bushing in the upper rib to route the static line to the ADHRS. Also connected the pitot and AOA lines to the ADHRS. Used removable zip ties that have rubber on the inside for now. Tried to secure the pitot lines, but need a couple more attach points. Installed the exhaust desiccant plugs I got from ACS last week that have been on back order forever. Spent 7/23-7/27 at OSH. Had a great time with Sam.