This is hardly worth an entry of it's own, but I just wanted to capture the finished product re how I closed out around the prop governor.

At this point, I believe the baffles are complete other than cutting and installing the rubber seals. I'd like to just drive ahead and knock this out so that I can scratch this off my punch list, but as I mentioned in another entry, the daily temp dropped about 20 degrees ver the weekend, which is the signal that fall is right around the corner, so I'm putting this in the parking lot for a few days to work on the canopy skirt, then windshield installation.

When working with plexiglass, the hotter ambient temp the better to minimize the chances of cracking something, so I want to get the windshield in while we still have some 80 degree days in the forecast.