Received my flexible conduit and was able to finish installing the wing wiring. I was going to mount the Garmin GMU 11 in the RH wing but after consulting with experienced builders on the forum and checking in with Brian at GA, the consensus was to mount it behind bulkhead A 12 - 20” aft in the fuselage. I took the example from Vans builder forum for mounting the conduit and drilled a 7/8” hole in a few of the ribs and ran the conduit through them. Used RTV to lock them in place. Worked out well and looks professional and functional. I also a “pull string” in the conduit for future runs, if needed.