I took about 1.5 weeks off from the build so I could run a race and visit family in KCMO. It was a nice break but missed building! Since my last post in June I've completed the following:

- Configured G3X system along with all other devices
- Mounted panel permanently
- Fitted glare shield
- located and ran all wiring to antenna's (except ones that will be mounted on wing)
- Wired all headset and mics (crossover console)
- Ran wiring for battery charge system w/n cockpit
- Connected autopilot cables to capstans (need to wait to tighten cables prior to final adjustments)
- wired XFER pump discrete to G3x
- Finished connecting static and pitot lines to avionics
- ordered throttle, prop, and throttle cables from McFarland
- mounted ELT system
- mount fresh air vents (sure wish I had mounted these PRIOR to install the firewall!